Riding is an entertaining activity that if you learn how to do it well, you will enjoy most of your rides in different locations.
If you are contemplating to start riding soon, this best beginner dirt bike for adults will expose to you the most essential and fundamental tips that will not only yield a smooth riding experience but will also enable you to manage your bike nicely.
Take your time, ride slowly until you master all crucial cruising techniques before you start riding like a pro.
How to Appropriately Start Your Bike
Every dirt bike engine is normally powered by a battery. You need to turn this battery on before you can ignite your bike and start moving on the road. The button to turn on the dirt bike is normally located at the top of the bike. Remember the button to turn on your battery could be located in different locations depending on you’re the type of your bike.
On warm environment or if you have been riding for long, you will not need to use your choke but if you are starting to ride and the bike is cold, you’ll need to use your choke. The choke is in most bikes located just beneath the battery but some bikes may be different. You move it from bottom to upward direction.
Once you are set, first, you need to ensure you are at a neutral position, no gear should be in action for a beginner. Hold your clutch and use the gear to lever on your feet to turn the bike into neutral position. Clutch is always on your left handle and on the right hand side is the front brakes so always note the difference when riding a bike.
Start Your Bike
While still on a neutral position and you seated on the seat, you can now start your engine. If it is an electric start, you just need to press the start button and the engine will start automatically. For manual ones, you will need to pull out the starter lever which is normally located on the right side of the bike at footrest level.
Place your foot there and kick down, you will notice the engine has started and you will just need to start riding straight away. If you used the Choke, remember to return it to its normal position before you start riding on the road. Now, hold your clutch and put your first gear.
It is advised that you leave your bike engine on for two minutes while in neutral position before you start moving. This is to allow your bike to warm up and enable oil to distribute in the system. Once the gear is in, you can then.
For starter dirt bike, hold the clutch and put your first gear in position. Slowly and gradually release the clutch as you adjust to the throttle to move your bike. Keep in mind your legs should be act accordingly since brakes and gear levers are located at the foot level.
Using Your Clutch and Gear Shifter to Change Gears
As a beginner, you may find it difficult to use your clutch to adjust the gears. It is simple, just always remember to press your clutch in and every time you hold clutch in, release your throttle so that you don’t energize your bike.
The gear shifter is normally located at the left foot and you can just squeeze it up or down depending on the kind of gear you want to use in riding. In most bikes, the first gear is below the neutral gear so to come to gear number two, you will first need to lift your gear lever to neutral, then lift it again up to number 5.
It is simple but it may confuse some first timers especially if the bike is not that responsive when changing gears. For kid’s bikes, the layout is a bit simple. Most kid’s bikes come with only three gear options.
When you step on the gear, you will be taken to neutral position and when you step again, you will be taken to 1st gear, step again and you will land on 2nd gear and another step you will be taken to 3rd gear. Gears on kid’s dirt bikes are not that strong and they don’t offer high speeds like the way adults bikes would do under the same gear lever.
Now Let’s Start Moving and Understand What Gears to Use
Now since the gear is on, you can now use the throttle to give gas to your bike so that you power your engine. The throttle is like your speed controller in some way because the more you squeeze it, the more gas you give to your bike and the more speed you ride.
As a beginner, ride in slow speeds first to prevent yourself from ramming into things. You may also go off the road if on high speed because as a beginner, you don’t have maximum control over your bike since you are new to the system.
Always use a gear number two whenever you are riding on a raise or sloppy land and if number two fails, you should turn to one and slowly use your throttle. On flat roads, use the number 3, 4 and 5 so that you don’t consume much of your gas in the bike.
Using Your Brakes
You will realize that you need to reduce speeds as you use throttle and clutch. That is okay and you need to know what to do and how to do it appropriately. First, make sure you hold throttle at the position it is. While still holding throttle at its position, press in your clutch and then apply foot brakes gradually until you come into a stop.
There is also a hand brake at your right hand but don’t apply this one unless you want to stop on the slop of a mountain because you can easily fall if you don’t use it appropriately.